四川一交警驾驶套牌车违停 公安局纪委介入调

The LVM (Logical Volume Manager) is a storage management system used by Linux operating systems. It allows for the creation of logical volumes, which can be viewed as containers that hold data.

The single biggest advantage of LVM is the ease of changing the size of logical volumes (consider it to as disk partitions).

In this tutorial, you'll learn what LVM is, how it works, and some of its other uses in Linux.

Before diving in, let's take a moment to learn a bit about LVM, ensuring you're equipped with the knowledge to make the most out of this storage management gem.

What is LVM in Linux?

Linux's Logical Volume Manager, or LVM for short, was introduced by Red Hat in 2001, and has since become a standard feature in many Linux distributions. It provides a way to map physical storage as virtual disks, which can be created, modified and destroyed as per your needs.

Instead of dealing directly with individual hard drives or storage devices, LVM creates a layer of abstraction, making storage management a breeze. This allows for more efficient use of your computer's storage capacity.

You can think of volume management on Linux using LVM as something very close or even a replacement to RAID, where you "pool" multiple physical disks together to create a one or more virtual storage devices.

Components of LVM:

Logical Volume Manager in Linux comprises several key components that work together to provide flexible storage management.

Here are the main components of LVM:

1. Physical Volume (PV): Actual storage devices like hard drives.
2. Volume Group (VG): Combine multiple PVs into a flexible pool of storage.
3. Logical Volume (LV): Virtual partitions within a VG that users can interact with (think of them as disk partitions).
4. Physical Extent (PE): Smallest units of storage in a PV.
5. Logical Extent (LE): Similar to PEs, but within LVs.
6. Metadata: Information describing the configuration of PVs, VGs, and LVs.

Enough reading about LVM! Let's dive in and get hands-on experience by creating partitions or logical volumes ourselves.

Installing LVM

Assuming you've already updated your system, let's proceed with installing LVM.

Actually, most Linux distributions come with lvm support pre-installed.

However, if, for some reason, they are not, you can easily install them by typing the following command in the terminal on Ubuntu or Debian-based systems:

sudo apt update
sudo apt install lvm2

Creating Partitions

First things first – you're going to create partitions on your hard drive. This makes it easier for the next step, where you'll set up the physical volume.

You can either create these partitions on a plain, untouched storage space, or you can use existing partitions.

Our example disk is called /dev/sdb. It's a 16 GB hard drive without any partitions right now.

To check out the details of our /dev/sdb disk, including its current state, use this command.

lsblk

I am using the parted command which is a CLI based partitioning tool but you can also use the GUI based tools like GParted or GNOME Disks.

I'll partition this 16 GB drive into two equal partitions and for that, I will use this command:

sudo parted /dev/sdb

Once you are inside parted wizard, create a partition table with:

mklabel gpt

Set up the units to Gigabytes:

unit GB

Now, create your first partition of 8 GB:

mkpart primary 0 8GB

For the other partition:

mkpart primary 8GB 16GB

Just to verify that your partitions has successfully created, check it using print command.

The output will look something like this:

To exit out of parted just type quit.

Creating Physical Volumes (PV)

It acts as the fundamental component for storage management like as a raw disk, or a disk partition, allowing administrators to pool and manage diverse storage resources within a logical volume group.

To create Physical Volumes, you'll be using the pvcreate command:

sudo pvcreate /dev/sdb1

and for our second partition also:

sudo pvcreate /dev/sdb2

To list all the PVs, you can use this command:

sudo pvs

You can also remove the physical volume using the pvremove command:

sudo pvremove /dev/sdb1

Creating a Volume Group (VG)

VG is a collection of one or more physical volumes (disks or partitions) that are grouped together to create a pool of storage resources. This volume grouping allows administrators to manage and allocate logical volumes (LVs) more flexibly.

In this section, you'll be creating a VG with the name of foss_vg for both /sdb1 and sdb2:

sudo vgcreate foss_vg /dev/sdb1 /dev/sdb2

To list the Volume groups, we need to use vgs command. Just like:

sudo vgs

and the output would be like this:

Extending a Volume Group

Suppose you have a new drive added with the name of /dev/sdb3 and you want to add it to your existing Volume Group to extend the size of it. You can simply add it with the vgextend command.

sudo vgextend foss_vg /dev/sdb3

Creating Logical Volumes (LV)

These are the virtual partitions created within a Logical Volume Group (VG), forming a layer of abstraction over the underlying physical storage.

You will be creating a LV named as foss_lv with the size of 2084 MB:

sudo lvcreate -L 2048 -n foss_lv_01 foss_vg

and another one, with the size of 4096 MB:

sudo lvcreate -L 4096 -n foss_lv_02 foss_vg

Viewing the Logical volumes that we just created using the lvdisplay command:

sudo lvdisplay

and the output will be :

Creating a Filesystem on Logical Volumes

After creating a LV, the next step is often to initialize it with a file system to make it usable. The mkfs command is employed for this purpose.

Specifically, to create an ext4 file system on the newly formed logical volume, you would use the mkfs.ext4 command.

sudo mkfs.ext4 -m 0 /dev/foss_vg/foss_lv_01

You can now mount this newly created filesystem to somewhere in your directory like:

sudo mount /dev/foss_vg/foss_lv_01 /mnt

Extend a Logical Volume

Unlike traditional partitions, LVs offer dynamic resizing capabilities, allowing administrators to easily adjust their size without the need to re-partition the entire disk.

This flexibility enables efficient storage management, facilitating tasks such as extending or shrinking volumes to accommodate changing storage requirements.

sudo lvextend -L +1200 /dev/foss_vg/foss_lv_01

To resize the filesystem and add back the new space we just created, type this command:

sudo resize2fs /dev/foss_vg/foss_lv_01

Remove Logical Volume

The lvremove command is utilized for the deletion of logical volumes. It is essential to ensure that the logical volume contains no important data before initiating the removal process.

Additionally, it is crucial to confirm that the volume is not currently mounted.

sudo lvremove /dev/foss_vg/foss_lv_01

Bonus: Automatically mount partition on boot using fstab:

It is simple, you just have to add one line at the bottom of the fstab file.

To edit the file, type:

sudo nano /etc/fstab

Move to the bottom and then add this line:

/dev/foss_vg/foss_lv_01    /mnt    ext4    defaults    0    2

The output would be something like this:

Once done, you can save and exit nano using CTRL+X then pressing y .

You also need to reload systemctl for the changes to take effect:

sudo systemctl daemon-reload

Conclusion:

The Logical Volume Manager is a powerful tool that provides many benefits for managing storage on your computer. It allows for efficient use of storage space, flexibility in file system support, and supports various backup and recovery options.

LVM might seem like a puzzle at first, but once you understand how its pieces fit together, it becomes surprisingly fun to use. So, take your time, explore, and feel free to reach out if you have questions. Happy LVM-ing!